Precision Pentalobe Screwdriver Set, 0.8 mm, 1.2 mm, 1.5 mm (P2/TS1, P5/TS4, P6/TS5) for Apple iPhone, MacBook Pro, Air Retina

Product Information

If you’re looking for a P2 pentalobe screwdriver, you’ve come to the right place. In this blog post, we’ll provide detailed information about this type of screwdriver so that you can make an informed decision about which one is right for you. A P2 pentalobe screwdriver is a specialized tool that is used to remove or tighten screws with a pentagonal head.

When shopping for a P2 pentalobe screwdriver, it’s important to consider the size of the tip and the handle. The bottom will be free So I’ve already done that to the first side and it worked out really nicely so I just had to do the other side as well and it’s all finished and looking great!If you’re one of the many people who upgraded to the iPhone X, you may be wondering how to open it without a screwdriver. The good news is, there are a few ways to do this. If you’re anything like me, you’re always misplacing your screwdriver. Or maybe you just don’t have one on hand when you need it. Either way, there’s no need to go out and buy a new one just to unscrew those tiny iPhone screws. Sony used 5-point pentalobe screws (though mostly simply referred as 'star shaped' screws pre-dating the currently accepted name) on its Sony CLIÉ UX Series PDAs in 2003.

If none of these work for your particular situation, consult an expert before proceeding further. What Screw Do You Need to Unscrew the Screws on the Iphone 11?Pentalobe screws reappeared in the mid-2012 version of the MacBook Pro. Eight 3mm and two 2.3mm pentalobe screws were used externally to attach the bottom plate of the case to the internal frame. [5] The late-2012 version of the 13-inch MacBook Pro was the first 13-inch model to have pentalobe screws; several were used externally in a similar fashion to the 15-inch mid-2012 MacBook Pro. [6] None of the three 17-inch models of the MacBook Pro have used any pentalobe screws. The next step is optional ,but we highly recommend it nonetheless : get yourself some kind magnetic mat or surface where you can store all these tiny little screws! You will need a Pentalobe (five-pointed star) screwdriver to remove the two screws on each side of the Lightning connector. The tip should be small enough to fit into the pentagon-shaped opening without slipping, but large enough to apply adequate torque. The handle should be comfortable to hold and provide good grip so that you can apply enough force without losing control of the tool. How to Remove Stripped Pentalobe Screws These pentalobe, 5 point heads are not to be confused with Torx heads which have 6 points. A "IPR" designation identical to "PL" is sometimes seen due to the confusion. It is possible that ambiguous "TS" nomenclature is the same as the "PL" designation when referring to Pentalobe screws.